Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Fontana, CA | Penhallow Remodeling
We provide independent KraftMaid cabinet installation, refacing, and repair across Fontana, and the thing that sets our work apart here is simple: we know how Kaiser-era slab homes and 105-degree summers treat these cabinets. Cabinet installation in Fontana runs $4,720 – $15,340, and full kitchen remodels typically land between $16,520 and $53,100. If you’re seeing thermofoil peel or water-swollen boxes, call (936) 259-2607 for a free estimate from Trevor Nash at Penhallow Remodeling. KraftMaid sales & service is what we do, and we do it with a written price before any work starts.
Why Fontana Residents Choose Us for KraftMaid Service
We didn’t learn KraftMaid from a brochure. We learned it from pulling hundreds of these cabinets out of 1950s and 1960s Fontana tract kitchens and seeing exactly where they fail first. Trevor Nash, our owner, came up through Los Angeles Trade-Technical College and worked nearly two decades on residential jobs before starting Penhallow Remodeling. That’s why when we tell you the plywood box on a KraftMaid Vantage is worth saving but the thermofoil doors aren’t, it’s because we’ve watched that exact door skin bubble on a west-facing Fontana kitchen window enough times to know what happens next.
Every tech that shows up at your door is background-checked and in uniform. You’ll know who’s walking in. We carry OEM KraftMaid doors, drawer fronts, and hinges where the line still supports them, and we match aftermarket Blum or Grass hardware when OEM is discontinued. We tell you which path we’re taking before we order anything. That’s how we run every Fontana service area job.
And we put it in writing. The Kingswell Way says it plainly: say the price before the work, show up in the window we gave, leave the place cleaner than we found it. Trevor’s rule is the same. “Give me the whole picture first, then we pick up the tools.”
Common KraftMaid Construction Problems We Solve in Fontana
- Thermofoil delamination on Vantage and Prelude doors. Fontana summers routinely push 105 – 110°F, and a west-facing kitchen window with no shade will cook a thermofoil door skin until it separates and bubbles. We see this most on KraftMaid Vantage and Prelude lines from the 1990s and 2000s. Replace the doors with painted or stained wood or a heat-stable laminate and the problem doesn’t return.
- Water-swollen particleboard boxes from slab leaks. Older Kaiser-era Fontana homes sit on original slab foundations, and the undersized plumbing that came with them is prone to slow leaks. A refrigerator line or supply line that drips behind a KraftMaid base cabinet turns that particleboard box into a swollen, crumbling mess within months. When the box is gone, refacing won’t help. We recommend full replacement and we’ll tell you why.
- Sagging soft-close hinges and drawer glides. KraftMaid used Blum hardware on many Momentum and Choice lines, and on older builds that hardware is often discontinued. After ten-plus years of heavy family-kitchen use, hinges sag and glides bind. We source OEM where we can, and match aftermarket Blum or Grass equivalents when we can’t.
- Racked and twisted cabinet frames on settled slabs. Fontana’s shrink-swell clay soils move, and the 1940s – 1960s tract homes here sit on slabs that shift with the seasons. A KraftMaid frame installed on an unleveled floor will twist and rack within a year or two. We shim, level, and stabilize before the first box goes in, because square frames don’t square themselves.
- Discontinued KraftMaid Choice and Momentum line parts. If your home predates 2000, there’s a good chance you have KraftMaid Choice cabinets with door styles and finishes the factory no longer produces. We’ll check before we order. If a direct match isn’t available, we’ll tell you what is, and what it costs, before you spend a dollar.
KraftMaid Service in Fontana: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic KraftMaid page. If you’re planning a kitchen or bath remodel anywhere in the blocks around the former Kaiser Steel site, now partly Steelworkers Park, your permit is likely to trigger a Phase I or Phase II environmental site assessment. Residual heavy-metal and slag contamination in the surrounding soil is a documented reality in Fontana’s mill district, and the city requires environmental review before it signs off on structural or interior renovation work in that zone. That review adds weeks, sometimes a month or more, before a single cabinet box can be hung. Neighboring Rancho Cucamonga and Ontario projects skip this layer entirely, so Fontana kitchen timelines have to be built around it. We handle that paperwork as part of the job and we build it into the schedule from day one. On a 1958 Kaiser-era tract home near Steelworkers Park, our crew pulled a KraftMaid Vantage kitchen whose thermofoil doors had bubbled and peeled after a decade of west-facing summer heat, with two base boxes water-swollen from a slab leak. We ran the Phase I environmental paperwork the mill-district permit triggered, leveled the settled clay-soil slab, then set new full-plywood KraftMaid boxes with Blum soft-close hardware and quartz tops. No delamination callbacks two summers running.
KraftMaid Models & Products We Service in Fontana
We work on the full KraftMaid lineup you’re likely to find in Fontana homes. KraftMaid Vantage, the builder-grade all-plywood box line that went into a lot of 1990s and 2000s master-planned subdivisions here. KraftMaid Momentum, the frameless full-access line with concealed hinges you’ll see in newer remodels. KraftMaid Choice, the older dealer-spec line common on pre-2000 Fontana homes. And KraftMaid Prelude, the entry full-overlay line that shows up in a lot of tract kitchen remodels. When OEM parts are still produced, we order them. When they’re discontinued, we match aftermarket Blum or Grass hardware and we say so before we proceed. No surprises, no quiet substitutions.
KraftMaid Service Pricing in Fontana
Here are real numbers for KraftMaid construction work in Fontana:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number? Cabinet line, box construction, whether the slab needs leveling before install, and whether you’re in the mill-district permit zone. A free estimate from us means a written price. Call (936) 259-2607 and we’ll put it in front of you.
Serving Fontana, CA - Our Local Coverage Area
We’re based in the Fontana area and know this community well, and we also handle Riverside Kraftmaid service. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Fontana
Thermofoil door skins delaminate when they’re exposed to sustained heat, and Fontana’s 105 – 110°F summers will do it faster than nearly anywhere else in the Inland Empire. West-facing windows with no shade accelerate the failure. The fix is replacing those doors with painted or stained wood or a heat-stable laminate. We can quote that replacement for you directly. Call (936) 259-2607 for an exact number.
Yes, if you’re in the blocks around the former Kaiser Steel site near Steelworkers Park. The city routinely requires Phase I or II environmental site assessments in that zone before permitting interior renovation work, and that adds weeks to your timeline. We handle the paperwork and schedule around it. Call (936) 259-2607 and we’ll tell you whether your address triggers the review.
Sometimes, and we’ll tell you honestly when we won’t. If the boxes are solid plywood and the frames are square, refacing with new doors and drawer fronts works. If the boxes show water-swollen particleboard or the frames have racked from slab movement, refacing is a waste of your money and we’ll say so. We’d rather lose the reface than sell you one that fails. Call (936) 259-2607 for a straight answer.
We level the floor before we hang the first box. Fontana’s clay soils move, and a cabinet frame installed on an uneven slab will twist and rack. We shim, level, and stabilize the base so the boxes sit square and stay square. That’s standard on every older Fontana install we do. Call (936) 259-2607 and we’ll walk you through what your slab needs.
No. We are an independent KraftMaid service provider, not authorized, sponsored, or warranty-endorsed by KraftMaid. That means we quote honestly and stand behind our own workmanship with our own written guarantee. The 365-Day Done Right Promise is ours, and it’s in writing on every job. If the work fails inside the guarantee period, we come back and fix it at no charge. Call (936) 259-2607 for a free estimate and a written price.
Service Areas Near Fontana
We serve Fontana and the surrounding Inland Empire communities. If you’re in Rialto, Bloomington, Rancho Cucamonga, or Jurupa Valley, we can run the same KraftMaid service for you. We also have dedicated pages for our KraftMaid service in Moreno Valley and KraftMaid service in Oxnard if you need work in those areas.
Book Your KraftMaid Service in Fontana Today
Call (936) 259-2607 for a free estimate on your KraftMaid cabinets. A live person answers, 24/7. We’ll give you a written price before any work starts, and a written guarantee that stands behind it. That’s how we work in Fontana.
Written by Trevor Nash, Owner at Penhallow Remodeling, serving Fontana since the Kingswell standard began in 2004.







Before
After
Before
After
Before
After