Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterTremron Construction in Moreno Valley, CA | Penhallow Remodeling
We’re Penhallow Remodeling, an independent Tremron service provider working across Moreno Valley, and the short answer is this: Tremron pavers work here, but only when the base is built for San Jacinto Valley clay, not for a generic California lot. We’ve re-set more Tremron Sierra and Mega Olde Towne fields in Moreno Valley than any other brand, and we know which lines hold up to heaving soil and which need geogrid underneath to stay flat. If you’re pricing a paver driveway, patio, or replacement, call (936) 259-2607 and we’ll give you a written number before any work starts.
Why Moreno Valley Residents Choose Us for Tremron Service
Trevor Nash, our owner, spent the better part of two decades on residential jobs across southern California before starting Penhallow Remodeling, and he’s the one who sets the standard on every Tremron hardscape we touch: the base matters more than the paver. That’s not a slogan, it’s what keeps a Mega Olde Towne driveway from rocking after two summers of 105-degree heat. We’re an independent Tremron sales & service provider, not a manufacturer affiliate, so we spec whatever base, edging, and drainage actually works on your Moreno Valley lot. That usually means geogrid over compacted Class II aggregate, pinned concrete edge restraint, and polymeric joint sand rated for Santa Ana wind exposure. You get a written price before work begins, and the crew shows up background-checked and in uniform. Simple as that.
Common Tremron Construction Problems We Solve in Moreno Valley
- Differential settlement and lippage on clay-soil driveways. The original tract builders in Moreno Valley compacted bases at production speed, and the expansive clay underneath heaves and shrinks with every wet winter and dry summer. After 5 to 10 years, pavers rock, pond water, and trip people. We lift the affected field, rebuild the base properly, and re-set the same pavers where possible.
- Efflorescence bloom on Sierra and Olde Towne faces. Moreno Valley’s hard irrigation water, combined with 105°F-plus summer cycles, pulls mineral salts through paver pores and leaves a white chalky film. We clean and seal with a breathable sealer so the color comes back without trapping moisture that causes more bloom later.
- Edge-restraint failure on Mega Olde Towne driveways. Builders and low-bid installers often use plastic edging instead of pinned steel or concrete curb. The field spreads outward, the joints open, and the driveway starts to look like a jigsaw puzzle someone stepped on. We pin steel or pour concrete curb, then re-set the perimeter course.
- Joint-sand washout and rutting along wind-exposed paver aprons. Santa Ana winds funnel through the passes and scour loose joint sand off driveways and entry aprons, especially where polymeric sand was over-watered or applied below spec. We re-sand with the right product and get it activated correctly so it doesn’t blow out in the first strong wind.
- Post-tensioned slab interface problems. Where a Tremron walkway or patio meets the house slab, differential movement between the slab and the paver base cracks the transition. We isolate the two systems with proper expansion joints so the movement doesn’t telegraph through the pavers.
Tremron Service in Moreno Valley: What Local Conditions Mean for Your Equipment
Here’s the thing most out-of-area installers learn the hard way: Moreno Valley’s building department routinely flags soil reports on any paver driveway, patio, or hardscape permit. The expansive San Jacinto Valley clay that heaves post-tensioned slabs also heaves paver bases, and plan check wants to see a geotechnical assessment before they’ll stamp your permit. That one step stops out-of-area contractors at the counter. We’ve been through this enough times in neighborhoods like Sunnymead Ranch and around the older 1985 – 2000 tract stock that we build the soil report into every Tremron repair in Riverside and Moreno Valley permit we pull. It’s not an upsell, it’s the reason our base details get approved on the first submittal instead of bouncing back for revisions. Contractors who skip it either eat the delay or bury the problem under a thin layer of sand that fails in three years. We’d rather show you the whole picture first, then we pick up the tools.
Tremron Models & Products We Service in Moreno Valley
We work on all four Tremron lines you’re likely to see on Moreno Valley homes: Sierra, the cobble-style tumbled paver that’s everywhere on driveways and walkways; Mega Olde Towne, the oversized tumbled paver builders used on three-car driveways and patios in the 1990s; Olde Towne, the classic tumbled paver on patios and pool decks; and Stonegate, Tremron’s segmental retaining wall block for grade changes on sloped lots. For repairs and small additions, we match existing Tremron OEM pavers so face texture, color, and thickness blend with the field, and we use equivalent-grade polymeric joint sand and edge restraint rather than whatever bag is cheapest at the yard. If a driveway has isolated settlement, we lift and re-set. If the base is failing across more than a third of the field, the honest advice is a full base rebuild, not another round of sand-and-tamp.
Tremron Service Pricing in Moreno Valley
Here’s what Tremron hardscape work runs in Moreno Valley, in real numbers:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Sealing | $250 – $700 |
What drives the number up or down: how much base has to be hauled out and rebuilt, whether you need geogrid (most Moreno Valley clay lots do), the Tremron line you choose, and whether we’re matching existing pavers or starting fresh. A free estimate means we walk the site, check what’s under the surface, and hand you a written price. Call (936) 259-2607 and we’ll get it scheduled.
Serving Moreno Valley, CA - Our Local Coverage Area
We’re a General Contractor in Moreno Valley and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Moreno Valley
Yes, for any permitted paver driveway, patio, or addition in Moreno Valley, the building department will almost always ask for a geotechnical soil report because the expansive San Jacinto Valley clay heaves paver bases and post-tensioned slabs alike. We build the assessment into our permit submittal so you don’t get stopped at plan check. Call (936) 259-2607 and we’ll walk you through the full picture before anything gets dug.
With a properly engineered base (geogrid, compacted Class II aggregate, and pinned edge restraint), a Tremron Sierra or Mega Olde Towne paver field should hold flat for 25 to 30 years on Moreno Valley clay. With the original tract-build base of 2 inches of decomposed granite on raw clay, you’ll see rocking and ponding in 5 to 10 years. The paver itself isn’t the weak point; the base is. For an honest assessment of your existing base, call (936) 259-2607.
Direct UV and extreme heat will slowly lighten any concrete paver over a decade or more, but Tremron’s color is mixed through the full paver, not just painted on the surface, so the fade is gradual and even. Efflorescence from hard irrigation water is a more visible issue here, and it cleans off without changing the paver’s structural color. We can seal your field with a breathable product that slows both heat fade and mineral bloom.
Yes, we source Tremron OEM matching pavers for repairs and small additions so face texture, color, and thickness line up with your existing Olde Towne field. If your original pavers have years of weathering, we’ll pull from the least-visible section of your current field and lay new OEM pavers there, so the repair blends instead of looking like a patch. That’s the same approach we’d take on any Moreno Valley Bathroom Remodeling or paver driveway project.
We dig to a depth that accounts for clay movement, then lay geogrid over compacted Class II aggregate, typically 4 to 6 inches depending on soil test results, followed by a bedding course and the Tremron pavers. Edge restraint is pinned steel or poured concrete curb, never plastic, because Santa Ana winds scour loose joint sand and plastic edges let the field spread. The whole detail gets specified on the permit drawings, so plan check sees exactly what we’re doing before we start. For a written quote on your Moreno Valley driveway, call (936) 259-2607.
Service Areas Near Moreno Valley
We run Tremron paver service throughout the San Jacinto Valley and neighboring Inland Empire cities. If you’re outside Moreno Valley proper, you’ll find us working in Moreno Valley service area communities like Riverside, Perris, Hemet, and San Bernardino. We also serve Tremron service in Oxnard and Tremron service in Huntington Beach for clients with properties near the coast.
Book Your Tremron Service in Moreno Valley Today
If your Tremron pavers are rocking, spreading, or just look tired, call (936) 259-2607 and we’ll get someone out for a free estimate. We’ll hand you a written price for the base, the pavers, and the permit, and we’ll stand behind the work with our 365-Day Done Right Promise.
Written by Trevor Nash, Owner at Penhallow Remodeling, serving Moreno Valley since the Kingswell standard began in 2004.