Boral Windows & Doors Nationwide

Boral Windows & Doors: The Los Angeles Owner’s Guide

If you have a Boral window or door that’s sticking, leaking, or has a roller that’s given up, we can match the part and install it. Our Los Angeles clients typically pay $470 – $2,125 for Boral part replacement, depending on whether it’s a roller assembly, a lock set, weatherstripping, or a full sash rebuild. Most owners notice the failure the hard way: a sliding door that suddenly takes two hands to move, or a window that won’t stay open without a prop.

Call (936) 259-2607

We’re an independent Los Angeles remodeling company, not a Boral dealer. That matters because we’re not trying to sell you a whole new door when a $90 roller kit does the job. Our techs carry the common Boral-compatible hardware on the truck, so the first visit is usually the only visit.

Which Boral Models This Applies To

Boral’s product lines shifted over the years. The older Builder Series aluminum windows and sliding doors are the ones we see most often in Los Angeles homes built between 1990 and 2015. The Boral Contemporary and Estate Series use different roller assemblies and locking hardware, so the model matters.

Look for the etched label in the corner of the glass or on the frame edge. It’ll show a two-letter series code and sometimes a date code. If the label is gone, measure the visible glass width in millimeters: the Builder Series uses a 24mm roller, while the Estate Series typically runs a 28mm. That’s the kind of compatibility gotcha that saves you from ordering the wrong part twice.

For OEM hardware, Boral parts are still available through specialty distributors, but lead times in Los Angeles run 3 – 6 weeks. Quality aftermarket equivalents from Prime-Line and CRL are usually in stock locally and cost 30 – 40% less. We’ll tell you which parts warrant the OEM spend and which ones are honestly interchangeable. For window sash hardware, the aftermarket options hold up well. For multi-point lock mechanisms on Boral doors, we recommend OEM – the tolerances are tighter and the aftermarket copies tend to bind.

Signs Your Boral Windows & Doors Is Failing

• Sliding door takes real effort to move. The roller bearings flatten over time, especially with LA’s fine dust working into the tracks. You’re hearing grinding, not rolling.
• Window drops when you open it. The spiral balance or block-and-tackle balance inside the frame has lost tension. This is a spring-loaded part that needs replacement, not lubrication.
• Drafts you can feel with your palm. Weatherstripping compresses after 8 – 10 years in California sun. In Los Angeles, west-facing doors degrade fastest.
• Lock won’t engage or feels mushy. The multi-point lock rods bind when the door settles even 3mm out of square. This is common in older Los Angeles slabs where the framing has shifted.
• Visible oxidation or white powder on aluminum frames. Salt air near the coast accelerates it. Not cosmetic – it eats the track the rollers ride on.

Replacement Cost & What’s Included

For Boral window and door part replacement in Los Angeles, here’s what we quote:

• Sliding door roller replacement: $470 – $940 per door, including both rollers, track cleaning, and adjustment.
• Window balance replacement: $295 – $590 per window.
• Multi-point lock replacement: $530 – $1,180 per door, OEM hardware.
• Weatherstripping replacement: $235 – $590 per opening, depending on the profile.
• Full sash or door slab swap: $1,180 – $2,125 when the frame is sound but the moving panel is too far gone.

Every number is parts plus labor, written down before we start. There’s no change order because we’ve already seen the opening. And if the replacement part fails within 365 days, the return visit is free under our Done Right Promise.

DIY or Call Us?

You can check the track for debris, and cleaning it with a dry brush costs nothing. But swapping Boral rollers or balances means removing a sash or door panel that weighs 40 – 90 pounds. Sliding door panels are heavy enough to injure a back or pinch fingers badly. The balance assemblies are spring-loaded, and releasing one incorrectly can send the window frame flying.

If the door’s off its track and you’re using a pry bar, stop. That’s how glass breaks and forearms get stitched. Call us at (936) 259-2607 and we’ll get a background-checked, uniformed tech out with the right parts. You’ll know the price before we touch it.

FAQs