ECO Window Systems Kitchen Remodeling Nationwide

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

ECO Window Systems Kitchen Remodeling: The Los Angeles Owner’s Guide

If you’re remodeling a kitchen around existing ECO Window Systems windows, a full replacement or retrofit typically runs $16,520 to $53,100 in Los Angeles, depending on layout, cabinet line, and how much structural work the window openings need. We stock ECO Window Systems-compatible trim kits, extension jambs, and sill adapters so your new cabinets, counters, and backsplash tie into the existing frames without gap fillers or ugly seams. Most owners call us when they pull off old drywall or cabinet skins and find water staining around the window flange, or when a previous remodel left the window sitting proud of the new wall thickness and the trim no longer sits flush.

Call (936) 259-2607

Key Takeaways

  • Kitchen remodels involving ECO Window Systems windows in Los Angeles cost $16,520 – $53,100 installed.
  • We match trim, sills, and jamb extensions to your specific ECO window series, not a generic box-store profile.
  • The 365-Day Done Right Promise covers the window integration work in writing.
  • Call (936) 259-2607 for a written price before any work starts.

Which ECO Window Systems Models This Applies To

Most ECO Window Systems kitchen installations in Los Angeles fall into one of three camps: builder-grade vinyl single-hung units in post-2005 tract homes, mid-grade tilt-turn or casement units in condo remodels from 2010 onward, and a smaller group of retrofit picture windows over sinks or garden windows above the prep counter. The gotcha we see repeatedly is jamb depth. ECO’s standard jamb depth is 4 9/16″, which matches a 2×4 wall with 1/2″ drywall on each side. But a lot of Los Angeles kitchens built in the 1960s and 1970s have 2×3 stud walls, or stucco exterior layers that push the total wall thickness to 5 1/2″ or more. If your new cabinet run or island changes the wall assembly, the old window jamb no longer lands flush, and that’s where a proper extension jamb, matched to the ECO profile, matters more than the window itself.

We are an independent contractor, not affiliated with ECO Window Systems. That means we’re free to tell you when the OEM trim kit is your best bet and when a well-machined aftermarket extension jamb will do the same job for less. On most ECO vinyl windows, the interior trim is friction-fit accessory, not part of the window’s weather seal. So aftermarket profiles, cut and finished in our shop, give you identical fit at roughly 60% of the OEM kit cost. For anything involving the window’s exterior flange or the glass itself, we source OEM or verified-equivalent only. You can identify your series from the sticker on the upper sash rail, usually an ECO part number starting with “EC” followed by six digits, and the rough opening size stamped on the edge of the frame.

Signs Your ECO Window Systems Kitchen Remodeling Is Failing

  • Water staining on the drywall beneath the window. This usually means the original flashing tape was installed directly over the ECO mounting flange without a sill pan behind it, and capillary action has been pulling moisture in for years. In LA’s winter rain bursts, that leak becomes visible fast.
  • Condensation between the panes. The ECO double-glazed units are sealed with a flexible spacer that breaks down eventually, often after 12 to 18 years in direct afternoon sun. Once fogging starts, the argon fill is gone and the unit’s insulating value drops by roughly a third.
  • Kitchen cabinets that don’t sit square to the window line. If a previous contractor shimmed cabinets to hide an out-of-plumb window, you’ll see uneven gaps at the crown molding or a countertop that runs 1/2″ out of level against the sill. That’s a framing or install issue we correct before cabinet placement.
  • Operable sash binding or refusing to stay open. The ECO balance hardware in older single-hung units uses a spring-and-block system that loses tension in coastal air. It’s a 20-minute parts swap, but only if the replacement block matches the original’s width and pull rating.
  • Gap between the sill and the new tile or backsplash. This shows the window wasn’t accounted for in the new wall depth, or the tile contractor built up to the frame instead of tucking behind it. The fix is a properly milled sill adapter, not a bead of caulk.

Replacement Cost & What’s Included

Kitchen remodels in Los Angeles that involve ECO Window Systems window work run $16,520 to $53,100 depending on scope. A smaller galley kitchen where we’re mostly integrating existing windows, swapping cabinets, and replacing counters falls at the lower end. A full gut with layout changes, structural work around the window openings, new window units, and a total cabinet and counter replacement lands at the higher end. We hand you a written price before any work starts, and the number on page one is the number on the invoice. That’s the Kingswell Way, and it’s been the standard since 2004.

Every line item is spelled out: parts, labor, disposal, and the window integration work. We install materials from recognized brands like KraftMaid and Wellborn cabinetry, and Cambria, Silestone, and Caesarstone countertops, because the products behind the guarantee matter. Every project carries our 365-Day Done Right Promise in writing: if it’s not done right, we make it right. No charge, no re-inspection fee, no arguing about whose fault it was.

DIY or Call Us?

You can safely check a few things yourself: read the ECO label on the sash, measure the visible wall thickness at the window opening, and note whether any trim gaps run wider than 1/8″. But the moment the work involves removing the window from its frame, cutting into wall framing, or reflashing the exterior, call someone who does this for a living. A window sitting in a wall assembly is one of the first places a kitchen remodel fails. If the flashing is wrong, you won’t see it until the first wet winter, and by then you’re pulling drywall and replacing cabinet bases. We’d rather put our written price in your hand before you pick up a pry bar. Call (936) 259-2607 and we’ll come out, look at the window, and tell you exactly what it needs.

FAQs

Need Construction help nationwide? Licensed & insured · Written quotes before work starts response · free estimates
Call (936) 259-2607
Areas We Serve

Request a Free Estimate

Tell us what you need - Penhallow Remodeling responds fast. No obligation.

By submitting this form, you acknowledge our Privacy Policy and agree that you may be contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Now
Call Now - 24/7 Dispatch