Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterMr-Glass Construction in Santa Rosa, CA | Penhallow Remodeling
We’re Penhallow Remodeling, our General Contractor in Santa Rosa, and we install and service Mr-Glass shower enclosures and glazing as a specialty discipline. What makes our Mr-Glass work different here is that we understand how Santa Rosa’s hard valley-floor water and WUI fire-code overlay change the way glass holds up over time. If you need a Mr-Glass frameless shower measured, installed, or repaired, call (936) 259-2607 for a written quote before any work starts.
Why Santa Rosa Residents Choose Us for Mr-Glass Service
Mr-Glass enclosures are precision glazing systems, not generic sheets of glass with hinges bolted on. We template every panel, manage moisture at the threshold, and spec OEM-spec tempered glass where tolerances actually matter. Trevor Nash, our owner, came up through LA’s residential trades installing glass in older homes where nothing was square, so he measures twice and shims once. That matters in Santa Rosa, where pre-fire 1950s and 60s ranch homes on the west side have walls that drifted a half-inch over sixty years. We’re not authorized by Mr-Glass, and we’ll tell you that plainly. We’re an independent local firm that happens to know their product lines inside out. For more on our broader Mr-Glass sales & service capabilities, that page covers the full picture.
Common Mr-Glass Construction Problems We Solve in Santa Rosa
- Cloudy, etched glass from hard valley-floor water. Santa Rosa’s older ranch neighborhoods pull water that carries dissolved minerals. On frameless Mr-Glass shower panels, scale that sits for months etches into the surface permanently. Squeegee or not, by the time it looks frosted, it’s usually a panel replacement.
- Pivot-hinge sag on heavy 3/8″ hinged doors. In Coffey Park’s 2018 rebuilds, many homes went up fast with builder-grade pivots reused from the original enclosures. A 3/8″ tempered door is heavy. Ten years of daily cycles and the pivot drifts, the seal fails, and water starts escaping at the curb.
- Silicone and sweep gasket failure causing subfloor moisture. West-side crawl-space ranch homes sit low. When a Mr-Glass bottom sweep tears or the silicone bead separates, water tracks under the door and into the kick space, where a crawl-space foundation traps it. That means must, and eventually, rot.
- Ember-borne pitting and thermal-cycling damage during Diablo wind events. Fountaingrove and other hillside homes under the WUI overlay catch wind-driven embers. Exterior-glazing-adjacent components and mirror backs expand and contract through fall heat spikes, and pitting shows up where you’d never expect it, on the backside of the glass.
- Misaligned bypass doors on uneven post-rebuild floors. Coffey Park and Fountaingrove slab pours from 2018-2022 were done at speed. When the track isn’t dead level, Mr-Glass bypass doors bind, jump the roller, or chatter. We correct the track plane before touching the glass.
Mr-Glass Service in Santa Rosa: What Local Conditions Mean for Your Equipment
Santa Rosa is a city built around the memory of the 2017 Tubbs Fire, and that memory now reaches into every Bathroom Remodeling in Santa Rosa project. The WUI (Wildland-Urban Interface) overlay in Fountaingrove and other hillside neighborhoods layers city-specific ignition-resistant requirements on top of state CAL FIRE rules. So a Mr-Glass enclosure job isn’t just about glass. The moment we touch an exterior wall penetration to plumb a shower or run a drain, the inspector is looking for ember-resistant vents and non-combustible soffits, because the overlay applies to any remodel that touches the exterior envelope. Last year in Fountaingrove, we replaced a sagging semi-frameless Mr-Glass hinged enclosure whose pivot and seals had failed after a decade, and the 2017 rebuild-era home still carried the WUI overlay. We also corrected the exterior vent screen at the same wall, swapped in OEM-spec 3/8″ tempered glass, fresh seals, and a reinforced header. The client got a clearance-free frameless walk-in shower that passed inspection without a correction notice. A contractor who only works Petaluma or Rohnert Park won’t see that coming. We do.
Mr-Glass Models & Products We Service in Santa Rosa
We work on the Mr-Glass frameless sliding shower door systems, including pivot and bypass series, and the semi-frameless hinged enclosures with 3/8″ tempered glass. We also install and replace Mr-Glass mirrored medicine cabinets, beveled-edge vanity mirrors, and custom-cut tempered shelves for built-in cabinetry. Our approach on parts: OEM-spec tempered glass and hinges where tolerances are tight, and quality aftermarket sweeps, seals, and rollers where the originals were wear items anyway. For fast Santa Rosa turnaround, we keep common Mr-Glass hinge sets, sweeps, and seals in our local stock so you’re not waiting two weeks on a shipping crate.
Mr-Glass Service Pricing in Santa Rosa
Here’s what Mr-Glass work costs through us in Santa Rosa. These numbers are written, not verbal ballparks, and they don’t change once the job starts.
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Walk-In Shower Remodeling | $9,000 – $28,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement & Panel Swap | $3,000 – $8,500 |
What moves the number: whether the glass is etched beyond saving, how much tile and substrate comes out, whether your home falls under the WUI overlay and needs vent or soffit upgrades, and the panel configuration. A standard semi-frameless hinged enclosure on a flat west-side ranch runs on the lower end. A full walk-in remodel with custom Mr-Glass glass in a Fountaingrove hillside home runs higher. Every estimate includes a written price before any work starts. Call (936) 259-2607 to schedule yours.
Serving Santa Rosa, CA - Our Local Coverage Area
We’re based in the Santa Rosa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Santa Rosa
Yes, as long as the enclosure itself is properly installed and the surrounding exterior penetrations meet the city’s ignition-resistant standards. The WUI overlay in Fountaingrove and other hillside zones applies to any remodel touching the exterior envelope, which means ember-resistant vents, non-combustible soffits, and Class A assemblies become inspection points when we open a wall for plumbing. We handle that compliance as part of the job, and our work passes without correction notices. Call (936) 259-2607 if you want us to look at your specific wall before you spend anything.
That cloudiness is mineral scale from the hard water that flows through Santa Rosa’s valley-floor supply lines, and once it sits long enough, it etches into the glass surface itself. Older ranch homes on the west side tend to have the worst cases because the plumbing has been carrying those minerals for decades. The fix depends on how deep the etching goes. Light scale can be polished out; deep frosted etching means a panel replacement. Call (936) 259-2607 and we’ll tell you which one you’re looking at, free.
You can replace just the panel if the glass is etched or cracked but the channels, hinges, and sweeps are still structurally sound. If the channel is compromised by rust or the hinge has wallowed out the mounting point, a panel swap buys you a year at best. We stock OEM-spec tempered glass for panel replacements, and we’ll tell you straight whether a panel or a full enclosure is the better spend. Estimates are free; call (936) 259-2607.
Many Coffey Park rebuilds went up quickly during the insurance-funded boom, and builder-grade pivots that were reused or under-speced are now failing under the weight of 3/8″ tempered glass. The hinges were never matched to the panel weight, and a sag shows up faster than it would in a slower-built home. We replace the pivot with OEM-spec hardware rated for the door weight and re-align the seal so the water stays in the shower. Call (936) 259-2607 for a written quote on the fix.
Yes. Diablo wind season runs roughly September through November, and those dry downslope gusts over 50 mph are when ember-borne pitting and thermal-cycling damage show up on exterior-glazing-adjacent components. We schedule Fountaingrove work year-round, and if your Mr-Glass enclosure is near an exterior wall, we’ll check the WUI compliance points during the visit. Call (936) 259-2607 to get on the calendar before the next red-flag day.
Service Areas Near Santa Rosa
We serve homeowners throughout Santa Rosa service area, including the Coffey Park, Fountaingrove, and west-side ranch neighborhoods. If you’re in a nearby community, we also cover parts of Petaluma, Rohnert Park, Windsor, and Sebastopol. For Mr-Glass work further south, see our Mr-Glass service in Rancho Cucamonga or our Mr-Glass service in Oceanside pages.
Book Your Mr-Glass Service in Santa Rosa Today
If you live in Santa Rosa and your Mr-Glass enclosure is sagging, clouding, or leaking, call (936) 259-2607. We’ll give you a written price before any work starts, a real arrival window, and a 365-day guarantee that if it’s not done right, we come back and make it right at no charge. That’s how we run every job in Santa Rosa.
Written by Trevor Nash, Owner at Penhallow Remodeling, serving Santa Rosa and Sonoma County.