Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Kitchen Remodeling Across Banning
Kitchen remodeling in Banning runs $14,000 – $45,000 for a full project, and $9,000 – $20,000 for a small kitchen, with the final number driven by cabinet line, countertop material, and whether you’re opening a load-bearing wall. If that wall is coming down, you’re in the San Gorgonio Pass High Wind Zone, which means Riverside County inspectors will require hurricane straps and gable-end bracing before drywall goes back up. Penhallow Remodeling handles that compliance work as standard, not as an add-on surprise. We serve Banning from our Inland Empire office with crews who know the local wind-load code better than most. Call (936) 259-2607 for a free written estimate.
Why Penhallow Remodeling Is Banning’s Preferred Kitchen Remodeling Company
Trevor Nash built Penhallow Remodeling around a simple frustration homeowners have everywhere, but especially in Banning: contractors quote low, open the wall, then discover the wind retrofits the code always required and hand over a change order. We don’t play that. Every Banning kitchen project starts with a written price that includes the structural work inspectors will actually require. No verbal ballpark, no range that drifts once demo starts.
Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking into your home off San Gorgonio Avenue or a side street near Nicolet Middle School. A live person answers our phone 24/7, not a voicemail tree. And every job carries the 365-Day Done Right Promise in writing: if something fails inside a year, we come back and fix it at no charge.
Small Kitchen Remodel in Banning
A Small Kitchen Remodel in Banning typically means working within the existing footprint: replacing cabinets, countertops, backsplash, flooring, and fixtures without relocating plumbing or removing walls, and it runs $9,000 – $20,000. Many Banning homeowners choose this route on the modest mid-century ranch homes near Wilson Street or the older Craftsman bungalows closer to downtown, where the kitchen wasn’t built for open-plan living and the budget doesn’t justify a full gut.
What the job includes
You get a full cabinet replacement or reface, new countertop material, a backsplash, updated sink and faucet, lighting, and flooring. We pull the permit, schedule the inspections, and keep the job clean at the end of every day, which matters when the San Gorgonio Pass winds are kicking dust and debris around the neighborhood.
When it makes sense
This is the right scope when your layout works but the finishes are worn out. At Banning’s 2,200-foot elevation, kitchens see real frost mornings in winter and triple-digit days in summer, and older laminate counters and particleboard cabinets don’t survive that thermal swing gracefully. A small remodel replaces them with materials built for the cycle.
Kitchen Cabinet Refacing Contractors in Banning
Kitchen Cabinet Refacing Contractors in Banning replace the cabinet doors, drawer fronts, and hardware while keeping the existing boxes, and the job runs $4,000 – $13,000 depending on door style and finish. It’s a practical choice for the pre-1950 wood-frame homes scattered through central Banning, where the original cabinet boxes were often built from solid fir or pine that’s still structurally sound even if the faces look decades past their prime.
What refacing actually involves
We measure every opening, order new doors and drawer fronts sized to your existing boxes, then apply a veneer or paint-grade finish to the face frames so everything matches. Hardware gets replaced, and we can add soft-close hinges. The job typically takes three to five days, which means less time living out of a temporary kitchen setup.
When refacing beats replacing
If your cabinet layout works and the boxes aren’t water-damaged or pulling away from the walls, refacing saves you 40 – 60% versus full replacement. It’s also less disruptive, which matters in Banning homes where the kitchen may be the only room between you and the wind rattling the south-facing windows off the Pass.
Trusted Brands We Service in Banning
We install KraftMaid and Wellborn cabinetry, Cambria, Silestone, and Caesarstone countertops, and Kohler and Moen fixtures. These are the brands we put behind our 365-Day Done Right Promise, because a guarantee only means something if the products underneath it hold up. Cambria quartz, for example, carries its own lifetime warranty alongside ours. When a Kitchen Remodeling project in Banning calls for a specific hardware line or finish, we order direct and verify lead times before we commit to a start date, so you’re not left with a gutted kitchen and an empty delivery schedule.
Common Kitchen Remodeling Problems We See in Banning Homes
- Load-bearing walls opened without wind strapping. Riverside County’s High Wind Zone designation means inspectors check rafter-to-top-plate connectors on any kitchen remodel that touches structure. Contractors from Beaumont or the Hemet valley often skip this and the rough-in fails, triggering a stop-work order and a surprise retrofit bill.
- Cabinet pull-away on exterior walls. Homes facing the San Gorgonio Pass take sustained wind pressure that flexes standard drywall and cabinet anchors. We see cabinets separating from walls within a season when non-rated fasteners were used on the windward side.
- Seam failures in countertops from frost-morning adhesive work. At this elevation, overnight frosts are common even in spring. Setting Cambria or Silestone seams with adhesive outside the manufacturer’s temperature window leaves seams that open within the first year. We schedule adhesive work around the forecast, not the calendar.
- Undersized gable-end bracing on older homes. Pre-1950 Craftsman bungalows in central Banning were never built for the wind loads the Pass delivers. When a kitchen remodel opens an adjacent wall, the existing bracing often doesn’t meet current code, and a compliant job includes upgrading it before drywall goes up.
Pricing for Kitchen Remodeling in Banning, CA
A full kitchen remodel in Banning runs $14,000 – $45,000. The spread comes from cabinet line (stock versus semi-custom KraftMaid or Wellborn), countertop material (laminate versus quartz or granite), and whether your project opens a load-bearing wall and triggers High Wind Zone structural work. Here’s how the common scopes break down:
| Scope | Typical Banning Range |
|---|---|
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Cabinet Refacing | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Every quote we write includes the permit, the wind-load retrofits inspectors will require, and the written guarantee. Call (936) 259-2607 for a free estimate with a fixed number you can hold us to.
We Also Serve Cities Near Banning
Penhallow Remodeling serves Kitchen Remodeling in Banning and the surrounding communities, including Beaumont, Calimesa, San Jacinto, and Yucaipa. Each city has its own permitting quirks, but none have the High Wind Zone scrutiny Banning gets, so the same compliance standard we apply here travels with us everywhere we work.
Serving Banning, CA - Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Kitchen Remodeling in Banning
Yes, if you’re moving plumbing, electrical, or opening a load-bearing wall. In Banning specifically, Riverside County inspectors will check for hurricane straps at rafter-to-top-plate connections and proper gable-end bracing on any structural modification, even a cosmetic one that opens a wall. We pull the permit, schedule the inspection, and make sure the work passes the first time. Call (936) 259-2607 for a quote that includes all of it.
A compliant Banning quote includes Simpson Strong-Tie hurricane straps at rafter-to-top-plate connections, upgraded sheathing fasteners, and gable-end bracing if the remodel opens a load-bearing wall. Cheap bids from out-of-area contractors often omit these entirely. Ask any bidder whether their quote covers High Wind Zone code compliance, and if they pause, that’s your answer.
A documented wind retrofit gives your insurance carrier evidence that the renovated structure meets Riverside County’s High Wind Zone requirements, which can support a premium discount or smoother claim process later. We provide the permit record and inspection sign-off with every job, so you have the paperwork in hand. Call (936) 259-2607 to talk through what your specific project would include.
Yes, if the existing cabinet boxes are solid and haven’t pulled away from the walls. Many pre-1950 Banning homes have fir or pine boxes worth keeping, and refacing runs $4,000 – $13,000 versus a full replacement that can double that. We inspect the boxes before recommending refacing, so you don’t spend money on a face if the structure underneath is failing.
$9,000 – $20,000 is the realistic range for a small kitchen remodel in Banning, assuming you stay within the existing footprint and don’t relocate plumbing or remove walls. The big cost drivers are cabinet line and countertop material, and if a load-bearing wall comes out, the High Wind Zone retrofits add to the total. Get a free written estimate at (936) 259-2607.
Written by Trevor Nash, Owner at Penhallow Remodeling, serving Banning and the San Gorgonio Pass communities.







Before
After
Before
After
Before
After