Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterWhy Los Angeles Homeowners Choose Unilock Construction
We provide Unilock repair in Los Angeles – re-laying and installing Unilock paver driveways, patios, and walkways for homeowners from the Valley to the Westside. Our crews have worked with Brussels Block, Beacon Hill, Umbriano, and Town Hall pavers long enough to know exactly how they fail under Los Angeles conditions: expansive clay soil, marine-layer moisture, hillside drainage, and UV that never really quits. We’re not authorized by Unilock and don’t claim to be – we’re a local remodeling contractor with deep hands-on time in these products, and we back our Unilock work with the same written price and 365-Day Done Right Promise we put on every job. Call (936) 259-2607 for a free estimate on Unilock paver repair, re-lay, or new installation.
Why Trust Penhallow Remodeling for Your Unilock Construction?
Unilock pavers are a premium product, but they only perform as well as the base beneath them and the hands that set them. Our technicians know the difference between a paver that failed and a base that never should have been laid that way in the first place. Trevor Nash, our owner, grew up in Reseda watching his uncle gut and rebuild the older ranch houses that fill the Valley, then spent years working residential projects across Los Angeles – including more than his share of paver driveways that looked fine on the surface and were a mess underneath. That’s why our Unilock work always starts with diagnosis, not demolition.
We use genuine Unilock replacement pavers when color and texture matching matters – and it almost always matters on a visible driveway or patio. For the structural layers underneath, we use quality aftermarket materials: compacted aggregate, edge restraints, and polymeric sand selected for Los Angeles soil and drainage conditions. Every Unilock project gets a written price before work starts, and the 365-Day Done Right Promise applies to paver work the same as it does to a kitchen or bath remodel. If our paver repair fails inside the guarantee window, we come back and fix it at no charge. That’s in writing, every time.
Common Unilock Construction Problems We Fix in Los Angeles
Unilock makes durable pavers. But Los Angeles is not a gentle place for anything sitting on the ground. Here are the issues we see most often, by product line, and what’s actually going on underneath:
- Efflorescence bloom on Brussels Block and Beacon Hill pavers. The marine layer that rolls into Los Angeles most mornings, combined with irrigation overspray, leaves white mineral deposits on the paver surface. It looks like permanent staining or fading, but it’s usually salt migration from within the paver or the bedding sand. Gentle cleaning and re-sanding often restores the original color – replacement is rarely necessary.
- Edge spalling and chipping on Umbriano and Town Hall pavers. Umbriano has a smooth, fine-grained surface that shows edge chips more readily than textured lines like Brussels Block. When we see chipping concentrated along a driveway edge or walkway border, the cause is almost always base movement over San Fernando Valley expansive clay – the paver edges bind and snap as the ground swells and contracts with moisture.
- Shifting and lippage at driveway aprons and walkway transitions. Los Angeles ground moves seasonally, especially in areas with high clay content. If the original base was too shallow or the polymeric sand joints have failed, pavers shift and one edge lifts above its neighbor. This is a trip hazard and a drainage problem. The fix is re-laying the affected section over a proper base, not just re-sanding the joints.
- Fading and surface erosion on exposed-aggregate Unilock finishes. Los Angeles gets roughly 15 inches of rain in a good year. That means pavers don’t get the natural rinse that keeps surface debris moving. UV beats on them for 300-plus days a year. Exposed-aggregate finishes slowly erode as the binder ages. Sealing with the right product slows it; aggressive power washing makes it worse.
- Ponding against foundations from settled paver driveways. We got called to a 1960s ranch in Woodland Hills where a Brussels Block driveway had heaved near the garage apron after winter rain, sending water toward the foundation. Our crew sawed out the affected field, found only 2 inches of road base over expansive clay, and rebuilt it with 6 inches of compacted aggregate and proper slope before resetting the original pavers with new polymeric sand. The homeowner kept the exact Brussels Block color match, and the driveway now drains away from the slab.
Unilock Parts & Our Repair-vs-Replace Approach
Genuine Unilock pavers are the right call when you’re matching color and texture on a visible field. Unilock’s manufacturing process creates specific blends – Brussels Block’s warm, varied tones or Umbriano’s consistent, smooth finish – that aftermarket copies rarely match well enough to avoid a visible patch. We source genuine Unilock replacement pavers for exactly that reason.
For everything supporting the pavers, we use quality aftermarket material: compacted road base, bedding sand, edge restraints, and polymeric joint sand. Those layers aren’t brand-dependent; they’re spec-dependent. Local Los Angeles suppliers stock what we need for most Unilock repair jobs, which keeps turnaround shorter than waiting on a factory order.
Our rule on repair versus replace is simple. If a localized section has failed – a few pavers cracked, joints washed out, a small area settled – we lift and re-lay that section. No push for a full tear-out you don’t need. But if the problem is base compaction or drainage, a patch keeps failing because the foundation is the problem, not the paver. We’ll tell you that plainly. Call (936) 259-2607 and we’ll give you an honest read on what your Unilock hardscape actually needs.
Our Unilock Service Process – Step by Step
- 1
Diagnosis. We walk your paver driveway or patio, check for lippage and joint failure, and identify the cause. In Los Angeles, that usually means evaluating base depth, soil type, drainage slope, and whether the original install accounted for expansive clay or hillside runoff. We also match your Unilock paver line and color so any replacement work blends.
- 2
Repair or installation plan. We give you a written price before anything gets touched. The scope says exactly what we’ll do: lift and re-lay a section, rebuild the base, install a new Unilock paver driveway, or re-sand and stabilize joints. No verbal ballpark that changes at the door.
- 3
Work. Our background-checked, uniformed crew does the work on the schedule we gave you. We saw out failing sections, compact the base in lifts, set pavers to spec, and finish with polymeric sand and edge restraints where the design calls for them.
- 4
Test and walkthrough. We check drainage, surface evenness, and joint stability before we leave. You walk the finished hardscape with us. If something doesn’t look right, we address it before we call the job done.
- 5
Written guarantee. Every Unilock repair or installation comes with the 365-Day Done Right Promise in writing. If the work fails inside a year, we return and make it right – no service call fee, no re-inspection charge.
Unilock Products We Service & Install in Los Angeles
We install and repair the Unilock lines most common in Los Angeles hardscapes. Brussels Block is the workhorse for driveways and patios – its tumbled, old-world texture hides everyday wear well. Beacon Hill offers a subtle flagstone look that suits mid-century ranch homes. Umbriano’s smooth, contemporary finish works on modern hillside properties, though it shows base movement more readily than textured lines. Town Hall pavers have a larger format and clean edges that make driveways feel more formal. We also work with Unilock wall systems and steps where they tie into paver surfaces. Local suppliers carry most replacement pavers and color blends, which keeps repair lead times shorter than special orders.
We Also Service These Brands
We’re a remodeling contractor first, not a single-brand paver shop, though we do offer Unilock service in Glendale. The same crews who set Unilock pavers also install KraftMaid and Wellborn cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Unilock project is part of a larger hardscape or home improvement plan, we’re equipped to handle the whole scope under one written price and one guarantee.
FAQs – Unilock Construction Service in Los Angeles
No. We are an independent Unilock service provider. We install and repair Unilock products and source genuine Unilock pavers for color-matching work, but we are not authorized, sponsored, or endorsed by Unilock. Our guarantee is our own – the 365-Day Done Right Promise we put in writing on every project.
Yes, for the pavers themselves. When a repair requires matching an existing Unilock field – Brussels Block, Beacon Hill, Umbriano, or Town Hall – we source genuine Unilock replacement pavers so the color and texture blend properly. For base aggregates, edge restraints, and polymeric sand, we use quality aftermarket materials selected for Los Angeles soil and drainage conditions. The structural layers don’t depend on the Unilock name; they depend on correct spec and proper installation.
A localized paver re-lay – lifting and resetting a failed section of driveway or patio – is typically a two to three day job, including base repair and polymeric sand application. A full paver driveway replacement runs longer, usually one to two weeks depending on square footage, access, and whether we need to address drainage or grade issues. We give you a written timeline alongside the written price before any work starts.
We service and install the Unilock lines most common in Los Angeles, plus Unilock service in Long Beach for Brussels Block, Beacon Hill, Umbriano, and Town Hall. We also repair Unilock wall systems and steps where they tie into paver hardscapes. If you have a Unilock product outside these lines, call (936) 259-2607 and we’ll confirm whether we can match materials and scope for the repair.
Unilock’s product warranty covers manufacturing defects in the pavers themselves, not installation workmanship. That means an independent repair provider lifting and re-laying your pavers doesn’t void the manufacturer’s warranty on the product. What matters is that the repair is done correctly – proper base depth, correct bedding, right joint sand. A bad repair fails regardless of who carries the paver warranty. Our work carries the 365-Day Done Right Promise, which covers our installation labor and materials for a full year after completion. For exact figures on your specific repair or installation, call (936) 259-2607 – estimates are free and the price is in writing before any work begins.
Unilock Service Pricing in Los Angeles
Unilock paver work in Los Angeles prices out by scope, base condition, and square footage. Here are the ranges we quote most often for this market:
| Service | Typical Los Angeles Price Range |
|---|---|
| Paver Driveway Installation (Unilock) | $8,260 – $21,240 |
| Paver Patio Installation (Unilock) | $4,130 – $12,980 |
| Driveway Sealing (Unilock paver joint stabilization) | $295 – $825 |
| Driveway Replacement (Unilock paver reset or full re-lay) | $5,900 – $16,520 |
What moves the number: base depth and soil condition, square footage, access (hillside Los Angeles yards with tight entry add time), drainage corrections, and whether we’re matching existing Unilock color or installing a new field. The quote you get is the price you pay – no change orders after demo unless you ask for additional scope.
Can you match my existing Unilock Brussels Block color if only part of the driveway has failed?
Yes. Brussels Block has a varied, blended color mix, and genuine Unilock replacement pavers from the same production blend will match an existing field closely. We lift and re-lay only the failed section, then re-sand the surrounding joints so the transition is as clean as possible. For an exact quote on a partial driveway re-lay, call (936) 259-2607 – estimates are free.
Is efflorescence on Unilock pavers in Los Angeles something you can remove without replacing them?
In most cases, yes. Efflorescence is salt migration, not paver failure. Gentle cleaning with the right chemistry, followed by re-sanding and – when appropriate – a breathable sealer, removes the white bloom and restores the original appearance. We don’t recommend aggressive acid washing or high-pressure blasting; both can etch the surface and worsen the problem. Replacement is only warranted when the paver itself has spalled or cracked. Call (936) 259-2607 and we’ll assess whether your Brussels Block or Beacon Hill pavers need cleaning, re-sanding, or something more involved.
Why are my Unilock Umbriano pavers chipping at the edges?
Umbriano’s fine-grained, smooth surface shows edge damage more readily than textured Unilock lines. When we see chipping concentrated along borders or transitions in Los Angeles, the underlying cause is usually base movement over expansive clay soil – the ground swells, the pavers bind, and edges snap under pressure. The fix is correcting the base and re-laying the affected area, not just replacing chipped pavers and hoping it stops. We’ll tell you plainly which scenario you’re dealing with. Call (936) 259-2607 for a free estimate.
Do you install Unilock pavers on slopes and in hillside Los Angeles yards?
Yes. Hillside installation requires deeper base preparation, proper sub-drainage, and in many cases a retaining edge or step system to keep the hardscape stable. Los Angeles hillside lots in the Santa Monica Mountains and Hollywood Hills add grading complexity and often trigger additional permitting review. We account for that in the written price and timeline before work starts. Call (936) 259-2607 and we’ll walk your slope with you.
Should I reseal my Unilock pavers in Los Angeles, and how often?
Los Angeles UV and the region’s low rainfall mean pavers don’t get the natural rinsing that keeps surfaces clean in wetter climates. A breathable sealer appropriate for Unilock pavers helps protect against fading, surface erosion, and staining. We generally recommend resealing every three to five years, depending on exposure, product, and sealer type. Over-sealing or using a film-forming sealer that traps moisture can do more harm than good on expansive Los Angeles soils. For a specific resealing recommendation and quote, call (936) 259-2607.
Book Your Unilock Service in Los Angeles, CA
If your Unilock driveway, patio, or walkway is showing its age – or you’re ready for Anaheim Unilock service – call (936) 259-2607. We’ll schedule a visit, diagnose what’s actually going on underneath, and give you a written price before any work starts. Estimates are free.
Written by Trevor Nash, Owner at Penhallow Remodeling, serving Los Angeles since 2004 as part of the Kingswell family of companies.